K 940 S x-motion

“Easy-Glide” - 6 year guarantee!

The patented tilt segment “Easy-Glide” fulfills the highest requirements in businesses and industries. A precise, guided, doublesided support, guarantees maximum load bearing and tolerance free tilting and is absolutely maintenance free. A special, highly durable synthetic material situated in the guide of the tilting segment ensures extremely smooth movement and long-lasting precision. The tilting guide system, a synthetic material tried and tested in aerospace and lock construction, works without the requirement of lubrication and is totally resistant to dust. With a 6 year factory guarantee this Felder component offers reliabilty for many years to come.

saw unit «133»

The large dimensioned Felder cast iron aggregate offers not only maximum power and precision but also extremely smooth running and efficiency.

Circular saw shaft

The saw shaft is enclosed in a massive­ cast iron housing. With the double bearing mounts, vibration free results are guaranteed. Power transfer from motor to sawblade is optimised through the use of a Poly-V belt.

To use a grooving cutter “Dado cutter”

It is also possible to use a grooving “Dado cutter” with your Felder K 900 sliding table saw. Especially developed by Felder, the cutter moves like a knife through butter. Massive in size and performance enabling cuts from 6.3– 19.5 mm.

The LCD touch screen control panel as standard!

CNC-drive control unit with 5.7” (145 mm) TFT screen situated in the overhead control panel

Scoring unit

There are two versions available for the operation of the scoring unit: Classic or Automatic. Classic: the height and lateral setting of the scoring blade is adjusted manually from the top of the saw unit table. Automatic: scoring saw blade height adjustment is electrical, and the side adjustment is manual. When the scoring unit is switched on, the scoring blade rises to its pre-set position automatically. When the main blade is switched off, the scoring blade automatically sinks back under the table. First class comfort!

Precision guiding system

The continuously developed linear guiding system from Felder has been astounding woodworkers since 1990. The high quality­ ­format sliding table guiding ­technology “X-Roll” comes with a 10 year Felder guarantee and offers amazing operating smoothness and is completely maintenance free. The 'x' design of the position of the roller bearings ensures that they move smoothly along hardened guides.

Remote ON switch on sliding table

On request we can equip your “900 Series“ with start buttons located directly on the sliding table to turn on the main and scoring blades. How about that for convenience?

The FELDER overhead saw guard

Highest operating safety and maximum flexibility when processing large dimensioned workpieces: the Felder overhead saw guard can be swung away easily and is always there where it is required.

The telescopic crosscut fence

The 2600 mm long telescopic crosscut fence can be effortlessly adjusted from 90° to 45°. A mitre scale on the outrigger table enables accurate adjustments. On request, we can equip your outrigger table with the precision mitre pin locating system. Locate your mitre angles accurately time and again! The large crosscut fence stops are constructed in such a way that a small tongue on the stop fits perfectly into a groove on the fence. This keeps the stop firmly in place for both straight and mitered cuts. On request: the digital crosscut stop. For repeatable accuracy to 0.1 mm with large LED display.

Stop scale

The bevelled mitre scale with accurate readout is visible from the operating area, enabling setting of the required crosscut value.

Angle adjustment and fence length compensation:

No reading errors due to scales and vernier. No time-wasting with arduous approximations of angle values. The advantage of the Felder degree index is that the stop is set and fixed without losing time or making reading errors. Highly precise index positions allow for the accurate production of polygons, e.g. 5.625º (32 sided), 11.25º (16 sided), 22.5º (8 sided). In addition, index positions at 15º, 20º, 25º, 30º, 35º, 40º and 45º can be used when working in slide to cut or push to cut mode. Every index position is equipped with a length compensator. The highly precise Felder degree index system is adjusted at the factory. Every index position also has individual fine ­adjustment. This cost effective index system integrates well into the machine design and will increase your productivity.

Rip fence of the highest quality

A rip capacity of 800 mm is standard with the option of upgrading to a rip capacity of 1250 mm. The rip scale is easy to read and perfectly integrated into the machine body. The aluminium rip fence can be adjusted along its axis to improve user comfort and safety when making repeated offcuts. The rip fence is easily and smoothly adjustable, with a clamping mechanism which can be engaged with one hand. The fine adjustment mechanism allows for precise measurements.

Rip fence with position control

The rip fence is positioned by a motor and runs via a dust-free integrated ball spindle in the saw table. The 1/10 mm precision, the high positioning speed, as well as the simultaneous positioning of the crosscut fence, saw blade height and saw blade angle ensure precision and save valuable working time.

The Felder control panel - intuitive and clear

The electric motor positioned rip fence running on a maintanence free lineal guiding system with ball bearing bushings moves quickly and accurately to within a tenth of a millimeter of the entered cutting width. The rip fence can be tilted away at any point along the full rip length and guarantees perfect cuts with a maximum width of 1250 mm. The operating panel provides you with all of the information relating to the rip fence in real time. Quickly and easily you can enter the required value onto the operating panel, saving time and increasing your productivity.

Digital display

The integration of the electronic digital display on the rip fence allows for the reading of the cutting width to one tenth of a millimetre. The display can be ­rotated up to 90° to suit the working position. Additional features, such as fine progressive adjustments in increments of 0.1 mm make precision cutting possible.

Pneumatic workpiece holder

EGL 1350

OUTSTANDING! The patented double mitre gauge from Felder allows for mitre cuts on pieces of differing widths and at any angle. Really easy to use: simply type in the desired angle as well as the widths of your workpieces on the keyboard. Immediately, you will receive the settings and can set the electronic double mitre gauge accordingly. The fence stop on the fence can be adjusted up to 1350 mm with the scale. Regardless of the angles set, the length compensating vernier scale allows you to compensate for the workpiece length.